How to enable Javascript

Latest Posts

Re: Nvidia Shield 2017 CEC @Fonzo I wrote already... but there is no answer at all -.- There is no development at all on this product since they sold it to Control4 and in this state the product is just unusable!
- vistalba
- vistalba
- 3 yrs ago
- Device Specific
- Reported - view
Re: Upgraded to Shield TV (2017) and can't get it working right @Ben McClure There will nothing be resolved in the feature since Neeo get sold to Control4. There is no development anymore on this Product. So it will be in this state forever.…
- vistalba
- vistalba
- 3 yrs ago
- Device Specific
- Reported - view
Re: Nvidia Shield 2017 CEC @Jeff It doesn't help anymore. Has stopped working for me at all... all commands are delayed multiple seconds!!!!
- vistalba
- vistalba
- 3 yrs ago
- Device Specific
- Reported - view
Re: Upgraded to Shield TV (2017) and can't get it working right @Ben McClure Exactly same issue here :( Any news about this to solve?
- vistalba
- vistalba
- 3 yrs ago
- Device Specific
- Reported - view
Re: Shape the NEEO future - Remove Cloud ties. - Keep the possibility to add/remove new devices. (custom devices) - Make it open source (Software for remote, brain and backend) - IR Learning mode - Make it possible to use…
- vistalba
- vistalba
- 4 yrs ago
- General
- Reported - view
Re: Nvidia Shield 2017 CEC @Markus Mahr @ingrid I've very slow control also. Sometimes it takes around 1-3 seconds until it responds. Any update on this?
- vistalba
- vistalba
- 4 yrs ago
- Device Specific
- Reported - view
Re: Serious battery issue I run into battery issues as well :( Remote battery used about 30% per "day" (morning to evening, not 24h). Before the battery life was okay. It was also not perfect before but I just had to charge…
- vistalba
- vistalba
- 4 yrs ago
- General
- Reported - view
Re: NEEO and WPA2 Enterprise WiFi @Jeff Any news about that feature?
- vistalba
- vistalba
- 4 yrs ago
- NEEO Remote & Brain
- Reported - view
Re: Hand recognition / Plex / proper spotify @David Hall said: I've had to rebuild a lot more code than I expectedand Oh, bad to hear :( @David Hall said: the fact that every time I make a change to the code I add a new client to Plex - which…
- vistalba
- vistalba
- 4 yrs ago
- General
- Reported - view
Re: KODI driver now in beta [1.3.8] @Niels de Klerk There are some ways to get docker work with mDNS. One of them is use "--net=host" so the network adapter from the host is used directly.…
- vistalba
- vistalba
- 4 yrs ago
- SDK / API
- Reported - view
Re: KODI driver now in beta [1.3.8] May it would be nice if someone can build a docker image? So everyone can use it with just a few ENV variables? Anyone is familiar with building docker images?
- vistalba
- vistalba
- 4 yrs ago
- SDK / API
- Reported - view
Re: Hand recognition / Plex / proper spotify @David Hall Any Update about the Plex Driver? Which device do you use for plex?
- vistalba
- vistalba
- 4 yrs ago
- General
- Reported - view
Re: Cannot communicate with Brain! @Ingrid Yes, thats right. At the moment I connected Neeo with LAN cable. So maybe there are errors but I didn‘t notice. One more thing is that I can‘t disable the WiFi on the Brain.…
- vistalba
- vistalba
- 5 yrs ago
- NEEO Remote & Brain
- Reported - view
Re: Cannot communicate with Brain! @Ingrid since the FW upgrade of Neei this is not happen for a long time. just a few infos about my setzp: Bacause Neeo doesn‘t support 5GHz at all, I‘ve already a ‚legacy‘ WiFi SSID only with basic…
- vistalba
- vistalba
- 5 yrs ago
- NEEO Remote & Brain
- Reported - view
Re: Denon receiver only turning off main zone @Andy I hope that Power Off will work after update. As a Workaround I used fist Power On and then Power Off in "Power Off Recipe". Power Off dosn't work if only Main Zone was On.
- vistalba
- vistalba
- 5 yrs ago
- Device Specific
- Reported - view
Re: Denon receiver only turning off main zone @Andy I tried it ou... Let's say.. the device start itself needs about 8-10 seconds. If I send Power ON (Main) and then Power OFF (Zone 2) short after each other it recognize the command after about…
- vistalba
- vistalba
- 5 yrs ago
- Device Specific
- Reported - view
Re: Denon receiver only turning off main zone @Andy Okay.. tested.... Result: POWER ON (MAIN ZONE) .... wait until started (about 8 - 10 sec) ... POWER OFF (ZONE 2) -> WORKS.
- vistalba
- vistalba
- 5 yrs ago
- Device Specific
- Reported - view
Re: Denon receiver only turning off main zone @Andy With the Neeo Remot or the original AVR Remote?
- vistalba
- vistalba
- 5 yrs ago
- Device Specific
- Reported - view
Re: Denon receiver only turning off main zone @Andy Okay... strange :-/ If I add the device an push "power on/off" directly on the setup screen it does power on/off "Zone 2". If I add the "Power Off" (Zone 2) to the Reciepe after Power On (Main…
- vistalba
- vistalba
- 5 yrs ago
- Device Specific
- Reported - view
Re: Denon receiver only turning off main zone @Andy Lol :) I never realized that Zone 2 is a extra "Device" Will now try to AVR Power ON and AVR Zone 2 Power OFF. (And how low I have to wait between this two commands.
- vistalba
- vistalba
- 5 yrs ago
- Device Specific
- Reported - view
Re: Denon receiver only turning off main zone @Andy Sorry, i'm really busy atm. Power toggle works. There is no "Zone 1 Power On" or "Zone 2 Power On" command in Neeo?! Do you mean with the original remote?…
- vistalba
- vistalba
- 5 yrs ago
- Device Specific
- Reported - view
Re: Denon receiver only turning off main zone @Andy Yes, Power Toggle is working for me. (But that is a bad solution)
- vistalba
- vistalba
- 5 yrs ago
- Device Specific
- Reported - view
Re: Denon receiver only turning off main zone I can see the same behavior on my Denon AVR X2400H. If I edit the Recipe there is no "Power On Main Zone" or "Power Off Main Zone". There is also no Zone Select at all.…
- vistalba
- vistalba
- 5 yrs ago
- 1
- Device Specific
- Reported - view
Re: Denon AVR X 2400h inconsistent volume @Andy Any news about that?
- vistalba
- vistalba
- 5 yrs ago
- Device Specific
- Reported - view
Re: Denon AVR X 2400h inconsistent volume @Andy No, this does also not work for me. I used "Philipps 14PF6826/00" Version 5 to test. Same behavior as with the dummy AVR.
- vistalba
- vistalba
- 5 yrs ago
- Device Specific
- Reported - view

1 2 3 Next

Back to top

vistalba

vistalba

Switzerland

72
57
0

Follow

Network Engineer