How to enable Javascript

Latest Posts

Re: Device-specific delay for recipes You can add a delay anywhere in a recipe. You can add multiple if you want and have a different lenght for each individual one. Hope this helps
- Robin S
- Robin_S
- 3 yrs ago
- Recipes
- Reported - view
Re: What does the button on the top of the Brain actually do? Cheers! Believe it or not, I had to find out the hard way because I had to do a hard reset of the brain yesterday; z-wave is not ready for prime time on the Homey yet unfortunately.
- Robin S
- Robin_S
- 3 yrs ago
- NEEO Remote & Brain
- Reported - view
What does the button on the top of the Brain actually do?
Tried to find the answer to this question: What does the button on the top of the Brain actually do? But could not find the answer 😕. Anyone? Thanks, Robin
- Robin S
- Robin_S
- 3 yrs ago
- 2 replies
- 82
- NEEO Remote & Brain
Re: TV icon fails to display Same problem here, two of my favorites icons disappeared and are now showing as a music icon like in the above post. Tried deleting and reading, bit that did not help.…
- Robin S
- Robin_S
- 3 yrs ago
- Recipes
- Reported - view
Re: Fibaro Dimmer 2 appears different on remote then on app I share your hope, but have fear mostly. This has been outstanding for very long now.
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Fibaro Dimmer 2 appears different on remote then on app I fully agree. This is not the way to have this remote be wife friendly. I have to operate the lights myself now....
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Fibaro Dimmer 2 appears different on remote then on app I am waiting for this still as well.
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Fibaro Dimmer 2 appears different on remote then on app Thanks for the update. Looking forward to the outcome!
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Fibaro Dimmer 2 not Adding @Paul Spee The picture in the app kinda shows you should and it seems to activate the process (when I press the button, the SUPER BRIGHT LED starts blinking.…
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Android considers the Neeo APP to be unstable (and is kinda right).
The Neeo APP on my Android phone (Galaxy S8+) is considered by Android to be unstable and I have to agree. The app regularly crashes and then needs to be restarted.…
- Robin S
- Robin_S
- 4 yrs ago
- 1 reply
- 237
- General
Re: Fibaro Dimmer 2 not Adding I initially had some challenges adding Z-Wave devices, up to the point where I realized I did it all wrong. Just to make sure you follow the right path (because I did not initially): In the APP,…
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Trouble adding Fibaro Dimmer 2 I have added, removed and added again the Fibraro Dimmer 2 without any problems. So it seems to either have been fixed or caused by something else in your case.
- Robin S
- Robin_S
- 4 yrs ago
- General
- Reported - view
Fibaro Dimmer 2 appears different on remote then on app
I have added a Fibaro Dimmer 2 to my set-up. It works really well so far using the on/off and dimmer function. I have not yet tested the more complex stuff like setting the parameters of the device…
- Robin S
- Robin_S
- 4 yrs ago
- 22 replies
- 767
- Device Specific
- IN PROGRESS
- IN PROGRESS
Re: Primare PRE30 @Andy It works as expected! Thanks! Kind Regards, Robin
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Pauses not working in recipies Did you unable the smart part of the delay? If not, then the delay might indeed not work in your specific scenario. When you set the delay, there is an option to switch on/off the smart delay.…
- Robin S
- Robin_S
- 4 yrs ago
- General
- Reported - view
Re: Primare PRE30 @Andy Yep it is 7 indeed. I will test during the weekend. Thanks a million for your swift actions! Kind Regards, Robin
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Primare PRE30
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Primare PRE30 @Andy Yes. 1 goes to 1, 2 goes to 2 etc.
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Primare PRE30 @Andy Hi Andy, this indeed is describing the Primare PRE30 Pre-Amplifier. Kind Regards, Robin See the picture for how I use "Input 1" as the power on for my "Versterker" (=Primare PRE30) in a recipe…
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Primare PRE30 @Andy Everything is rather instant. When the device is in state "standby", pressing (input) 1, 2, 3,.. instantly switches the device to state "Powered on" and it can instantly receive the next…
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Primare PRE30 @Andy My device works well, but is categorized as a "stupid" device. The device however can be woken from "standby"/"switched on", by selecting one of the inputs (any one of the inputs works).…
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Agron DAB+ Adapter V3 not in database Works like a charm. Thanks!
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Re: Pauses not working in recipies I fixed this issue with adding multiple 5 second "waits". That does the job for me, indeed a 20 second wait does not work as it should. So far for me 5 second ones are the sweet spot.
- Robin S
- Robin_S
- 4 yrs ago
- General
- Reported - view
Re: Agron DAB+ Adapter V3 not in database Cheers! I will try this weekend and let you know.
- Robin S
- Robin_S
- 4 yrs ago
- Device Specific
- Reported - view
Agron DAB+ Adapter V3 not in database
I have a Argon DAB+ adapter V3 which does not exist in the database. I have tried similar Argon devices, but these do not work. I CAN partly control the device using this "code set" :…
- Robin S
- Robin_S
- 4 yrs ago
- 4 replies
- 132
- Device Specific
- SOLVED
- SOLVED

1 2 Next

Back to top

Robin S

Robin_S

30
0
0

Follow