Denn AVR-X4500H Power On/Off not working
as I restructured my recipes it shows, the the Power On and Power Off command of the Denon AVR-X4500H is not working at all. Only Power toggle works there. Would really like to see an update for the device.
Is the brain well positioned? If the LiveIr test does not work I have to delete the discreten power.
Please test the commands included in the following Live IR Test.
The Live IR Test works the following way:
1. Navigate to the Settings Menu in your NEEO app.
2. Navigate to NEEO Brain.
3. Click on "Live IR Test".
4. Enter into the text field the following code: 0qTxsFQi3Q
5. Test the commands
Thanks for testing!Reply
Sorry for the late response. Had to test things out. The discrete codes works fine. But I still have a strange behavior. After the test everything worked good. But some days later, same thing again, the AVR does not turn off when everything else does. I have now changed the sequence that the AVR is turned off first, and everything else afterwards with a delay in between. I will post an update when I have tested it for some days.Reply
Fäbu so I have a really strange behavior with my Neeo. When I enter the code of the live testing everything works as it should. but after 3-4 days it seems as the code is lost and the AVR is not turned off anymore.
I reseted the brain and set up everything new but it does not help. Is there a possibility to flash the last firmware to the brain again?
Also when setting things up from scratch I find it uncommon the I´m not asked if the TV will send the sound via AVR (tried both adding the AVR first and the TV second and vice versa). So I have to add the Power on and Power off to the TV recipe manually. Is that right?Reply