Issues for Recipes (Fonzo) - Troubleshooting Topic
Fonzo As you mentioned over here:
I know an Issue when you add a Target device (Display, TV, Beamer) Twice, you end up with two started Recipes. That's why the multi Device input is also only a workaround around the Issue that the Recipe is not fully manual doable.
Let me try to revocer your current Setup, If i'm wrong, you may like to correct me:
Recipe Watch TV on TV (1):
Dreambox 1 AVR 1 TV 1
Power ON Recipe:
Switch on AVR Switch On TV Switch On Dreambox Select Input AVR HDMIa Select Input TV HDMIa Select Output AVR 1 Use AVR Volume Show Dreambox Controls
Then Everything is working as expected?
Recipe Watch TV on Beamer (2):
Dreambox 1 AVR 1 Beamer 1
Power ON Recipe:
Switch on AVR Switch On BEAMER Switch On Dreambox Select Input AVR HDMIa Select Input Beamer HDMIa Select Output AVR 2 Use AVR Volume Show Dreambox Controls
Recipe Watch Netflix on TV using TV (3):
AVR 1 TV 2
Power ON Recipe:
Switch on AVR Switch On TV2 Select Input AVR HDMI Back (ACR) Select Output AVR 1 Use AVR Volume Show TV2 Controls
(I'm not aware if you add the Devices like this or add all a second time, but this is the recomended Setup i would suggest to use)
These Requires you to only add a Target Device Like TV Again, When you like to Open a App on the TV to show you e.g. Netflix or such things. Source Devices should not required to be added a second time.
Also the Same for the AVR as middle, Because the "Automatic Generated" Recipe will allways come for an Target Device which then includes The Use Volume and the Show Controls of Step and regognise this the correct way.
You so will end with multiple TV's and multiple Beamers (Each time you need a new Recipe to start a new Action. But you are not required to Add the Dreambox twice because you use Beamer and TV (only if these are located in different Rooms in NEEO Setup).
This only can end up (like i currently also have) when you start the TV watch Recipe (Recipe 1)
If you like to you can reply with Pictures of the Recipes and maybe we get you a better experience if we figure out together.
Markus Mahr Let me try to revocer your current Setup
I try to control a PS4 Pro, Nvidia Shield and a Dreambox with NEEO. Because Bluetooth is still not supported the only way to control the Nvidia Shield and the PS4 Pro directly with NEEO alone is CEC.
Settings PS4 Pro
Recipe Dreambox TV
Playstation 4 TV
Status at the moment nothing works.
The current behavior of the NEEO Recipes:
Recipe Dreambox turns Dreambox on, Input is PlayStation 4 (wrong should be Dreambox), TV is turned on. The recipe is shown as active if I try to stop the recipe Tv turns off, AVR turns off, Dreambox turns off but sometimes it stays on.
Recipe Shield TV turns on Dreambox (wrong), TV is turned on, AVR is turned on and input is switched to shield. No picture from the shield. I can get only a picture from the shield if I use the original remote then the picture shows up and the shield is turned on. The recipe is not shown as active so there is no possibility to turn off the recipe with NEEO again. If I test the shutdown sequence of the recipe in the app TV turns off. AVR turns off. Dreambox is on.
Recipe PlayStation 4 turns on AVR, Playstion is tuned on, Input is Playstion, TV is turned on. But no picture because the PlayStation is immediately turned off again. If I use the original PS4 controller I get a picture and the PS4 stays on. NEEO recipe is not shown as active so no possibility to turn off the PlayStation 4 via NEEO. If I test the shutdown sequence of the recipe in the app, PS4 is turned off, TV is turned off, AVR stays on.Reply